Mei Ni Edit Automotive radar

Truck school bus trailer RV, VAN, how to choose parking sensor safety equipment,As the name suggests, automobile radar is used for automobiles or other ground motor vehicles. Therefore, it includes different radars based on different technologies (such as laser, ultrasonic and microwave), with different functions (such as detecting obstacles, predicting collision and adaptive cruise control), and different working principles (such as pulse radar, FMCW radar and microwave impact radar). Microwave radar has important commercial significance in automotive radar.

Demand for automotive radar
The demand for automotive radar can be understood from three levels. From the national level, the statistical data of casualties and property losses caused by vehicle accidents, as well as the estimated data of some accidents that can be prevented by technical aids, promote the development of vehicle radar. The cost-benefit ratio between the economic losses caused by these accidents and the declining cost of vehicle radar fully shows that it will be widely used. From the perspective of automobile manufacturers, radar is another major feature to attract consumers to buy. It is a potential source of income and competitive advantage. And regulatory and public sectors are likely to demand safer cars. From the perspective of car owners, car radar as a safety device is convenient and not very expensive, which is very attractive to consumers. It also has more practical importance, that is, it can undertake some work that requires attention, judgment and technology, so as to reduce the intensity of driving and reduce the driver’s burden.

Parking Sensors
Parking sensors are one of the most common automotive radars, mainly composed of ultrasonic sensors, controller, display and buzzer. These sensors are often utilized in conjunction with a wide angle camera, LCD monitor, or LED display. They help drivers to back up and park more safely and easily. They use radar technology to detect nearby obstacles, and relay this information to the driver in the form of an audible beep or visual cue. They can be installed on the front or back of a vehicle to meet your unique parking needs. Backup sensors are motion activated detectors that alert drivers and/or pedestrians, by beeping/chirping when objects are too close behind a particular vehicle in reverse. 

Backing up your car can be tricky – whether you’re manoeuvring your way into a tight parking lot, or reversing out of an unfamiliar driveway, driving any vehicle backwards can be a real challenge. That’s where parking sensors come in. These handy devices give drivers the confidence they need to back up safely, by providing live feedback when you’re getting a little too close to an object.

Many modern vehicles come with pre-installed rear parking sensors, but if your car isn’t one of them there’s no need to worry. A whole range of aftermarket parking sensors are available on the market, so you can back up safely no matter what you drive.




Highlights
Parking Sensor Benefits:
- Helps to prevent accidental damage when parking.
- Reverse with increased safety and confidence.
- Helps to protect your no claim bonus.
- Faster & easier parking especially in tight situations.
- Side protection when parking in narrow lanes or garages.

About Cocves parking sensors
Cocves has been specialized in the industry of vehicle safety systems for more than 13 years. Our parking sensors are designed and widely used for trucks, cars, vans, pickups, trucks, trailers, and buses. Here are some of our hot selling models:

CO-PST01-B Backup sensor system 

learn more:https://www.cocves.com/products/all-sensor-systems/62.html

• 4 sensor systems
• 12-36V Voltage supplied
• 2.5/1.5m detection range (selectable via dip switch) 
• Distance between obstacle and the sensor closest to object will be real-time displayed on monitor
• Alarm warning display for Gradual Vision and Auditory Distance
• Underslung and flush-mount fixings included
• Fitted to rear (selectable via dip switch)

Contents:
4 x sensors
1 x buzzer
4 x 0° flush mount fixings
4 x 11° flush mount fixings
4 x underslung fixings
1 x Waterproof control box
4 x 2.5m sensor cables
1 x Φ28mm drill, 16x screw, 10x plastic tie

Optional:
1 x 7” LCD monitor (CO-TM7001)
1 x 15m monitor cable (CO-TC15)
1 x rear camera (CO-RVC16)
1x 7m camera cable (CO-TC7)
CO-PST01-L / CO-PST01-R Side sensor system 


•4 sensor systems
•12-36V Voltage supplied
•1.5/0.8m detection range (selectable via dip switch) 
•Distance between obstacle and the sensor closest to object will be real-time displayed on monitor
•Alarm warning display for Gradual Vision and Auditory Distance
•Underslung and flush-mount fixings included
•Fitted to left or right side (selectable via dip switch)

Contents:
4 x sensors
1 x buzzer
4 x 0° flush mount fixings
4 x 11° flush mount fixings
4 x underslung fixings
1 x Waterproof control box
4 x 4.5m sensor cables
2 x 2.5m extension cables 
1 x Φ28mm drill, 16x screw, 10x plastic tie

Optional:
1 x 7” LCD monitor (CO-TM7001)
1 x 10m monitor cable(CO-TC10)
1 x side camera(CO-RVC08)
1x 10m camera cable(CO-TC10)